autor | správa |
Laco16 modelár Príspevkov: 11 Moje modely Poslať správu |
Nasiel som celkom prehladny nemecky test spolahlivosti benzinovych jednovalcovych motorov od 30ccm do 50ccm. Snad to niekomu pomoze pri kupe motora. Preposielam odkaz: http://www.rcgroups.com/forums/showthread.php?t=1796064 |
baro modelár Príspevkov: 171 Moje modely Poslať správu |
ty brdo dobre az na to ze ako to tak citam zistujem,ze zabudam nemecky |
Laco16 modelár Príspevkov: 11 Moje modely Poslať správu |
Je to po anglicky. |
MATHIAS modelár Príspevkov: 337 Moje modely Poslať správu |
Konecne niekdo naozaj overil môj osobny nazor LIKE!!!! We have tested several makers of 30 and 50ccm 2-stroke class 1-cylinder petrol engines. Test was done in Germany. Here are the results: 1. 3W-28i - Total running time 2628 hours (without any problems,no compression lost, still run fine, very high recommended) 2. DA-50 - Total running time 2322 hours (without any problems,no compression lost, after 29 hours was adjusted high speed needle, still run fine, very high recommended) 3. OS MAX GT33 - Total running time 2090 hours (without any problems,no compression lost, high japanesse quality, still run fine, very high recommended) 4. DLE 30 - Total running time 2082 hours (without any problems,no compression lost, there was necessary to adjust two times high speed needle, still excellent running , high recommended, maybe the best chinese engine) 5. ZEONAH 38 - Total running time 2065 hours (without any problems,no compression lost, there was necessary to adjust several times high speed needle, still good running , high recommended) 6. MINTOR 33 - Total running time 2052 hours (without any problems,no compression lost, some time turned off by himself, after adjustment has been engine running improved, high recommended) 7. DLA 32 - Total running time 1812 hours (compression was worse and worse, after 1812 hours was necessary change several parts and invest next money , there was necessary to adjust several times high speed needle) 8. MVVS 30IFS - Total running time 1250 hours (compression was worse and worse, after 1250 hours was necessary change many parts and invest a lot of next money ,irregular engine running) 9. DM33 - Total running time 915 hours (compression was worse and worse, after 915 hours was necessary change many parts and invest a lot of next money ,cheap chinese engine) 10. JC30 EVO - Total running time 901 hours (compression was worse and worse, after 901 hours was necessary change many parts and invest a lot of next money ,cheap chinese engine) 11. RCG30 - Total running time 405 hours (compression was worse and worse, after 405 hours was engine damaged,cheap chinese engine, No recommended) 12. TURNIGY30 - Total running time 310 hours (died during flight, after 310 hours was engine completely damaged,cheap chinese engine, No recommended) |
zoom modelár Príspevkov: 498 Moje modely Poslať správu |
Takze urcite DA 60 kvalita za prijetelnu cenu. |
ods modelár Príspevkov: 437 Moje modely Poslať správu |
Autor: ods
Správa zaslaná: 17. 1. 2013 o 12:50
...no ja by som tomuto tiež veril , ale iba po tretiu položku ostatné po 3l vína |